If you notice any software malfunctions with your Haier W858S android device, you're most likely required to download and flash stock ROM firmware on your W858S to permanently correct the software errors you noticed on your Haier W858S. And when you load stock firmware on your Haier W858S using any Qualcomm flash tool, your Haier W858S will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.
If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Haier W858S Stock ROM Firmware Download Link(s)
1. Haier W858S_H01_A2_S_S002 (Android 4.3) Stock Firmware Download Link
How to Flash Stock Firmware On Haier W858S
1. Download your Haier W858S stock ROM firmware from the link above.
2. Extract the Haier W858S Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here
4. Now, choose either of the tools listed below here to load the stock firmware on your Haier W858S.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Haier W858S.
2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.
3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Haier W858S, if need be.