If you notice any software malfunctions with your Haier L901 android device, you're most likely required to download and flash stock ROM firmware on your L901 to permanently correct the software errors you noticed on your Haier L901. And when you load stock firmware on your Haier L901 using any Qualcomm flash tool, your Haier L901 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.
If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Haier L901 Stock ROM Firmware Download Link(s)
1. Haier L901_H02_S11_20141204 (Android 4.4.2) Stock Firmware Download Link
How to Flash Stock Firmware On Haier L901
1. Download your Haier L901 stock ROM firmware from the link above.
2. Extract the Haier L901 Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here
4. Now, choose either of the tools listed below here to load the stock firmware on your Haier L901.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Haier L901.
2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.
3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Haier L901, if need be.