Xolo Q800 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo_Q800_0202_T0670 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q800, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q800, Stock ROM file which can be used to flash factory OS back to your Xolo Q800.

How to Download Stock Firmware and Flash Xolo Q800 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q800 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q800 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q800 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q800 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q800 or remove battery from it and re-insert the battery again. Connect your Xolo Q800 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q800 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q800 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q800



How to Remove FRP Lock On All Allview Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Allview android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Allview devices powered with MTK chipset therefore, other Allview devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Allview Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Allview android device meets up that criteria.
Remove FRP Lock On NCK Box

5. Now, remove battery from your Allview android device and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to your Allview android device.

7. Almost immediately, if the installed drivers work with your Allview android device, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Allview android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Allview android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Allview Android Devices

It's simple. To prevent your Allview android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Allview android device.
To know how many Google accounts are associated with your Allview android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Allview Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Allview android device until there is none left.

Now, you may peacefully proceed to wiping the userdata or factory-reset your Allview android device.

Recommended:

Xolo Q800x Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo Q800x Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q800x, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q800x, Stock ROM file which can be used to flash factory OS back to your Xolo Q800x.

How to Download Stock Firmware and Flash Xolo Q800x with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q800x firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q800x Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q800x stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q800x stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q800x or remove battery from it and re-insert the battery again. Connect your Xolo Q800x Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q800x to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q800x using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q800x



How to Remove FRP Lock On All Alcatel Android Devices Using NCK Box

NCK BOX is an excellent tool for removing FRP lock on android devices. In this tutorial, I will discuss how to successfully remove FRP lock on any Alcatel android devices using NCK BOX.
Before I proceed, it should be noted that this tool only works with Alcatel devices powered with MTK chipset therefore, other Alcatel devices powered with Qualcomm or any other chipsets may not work by this tutorial.

Removing FRP Lock On Alcatel Android Devices Using NCK BOX

1. Download NCK BOX from your ABC Package here on Mediafire or Mega.

2. Download and install MTK Android drivers on your PC. You may use PDanet+ or Install USB VCOMM Drivers from here!Important.

3. Now, locate NCK BOX you downloaded from the step one above. It is compressed in a ZIP file, unzip it and then, install the setup file on your PC and launch it. Launch/Open NCK Box you just installed as Admin.

4. On NCK Box, locate Service tab. From the third (3) pane, Locate FRP and click it. Pay attention to the Warning NCK Box displays and make sure your Alcatel android device meets up that criteria.
Remove FRP Lock On NCK Box

5. Now, remove battery from your Alcatel android device and insert it again. If the battery cannot be removed, put off the phone.

6. While NCK Box awaits, connect a compatible USB Cable to your PC and then, the other end to your Alcatel android device.

7. Almost immediately, if the installed drivers work with your Alcatel android device, NCK Box should detect the phone and initiate the operation sequence. This should not take more than 5 minutes. When NCK Box is done, your phone will restart and if it doesn't, disconnect the phone and restart the phone by yourself.

8. Congratulations! By now, you should be greeted with your setup screens. Complete the setup and enjoy your phone!

What is FRP Lock?

For informational reasons especially to those that do not know what FRP Lock is or means, a brief note about what FRP Lock is and its meaning should be included here so that you may know how to avoid re-occurrence of the same issue afterwards.

If your Alcatel android device asks for owners credentials that was used when the phone was first setup. Or, maybe it's demanding for a specific Google account and rejects all the ones you have entered on the phone though the credentials (password and username) entered are correct, then, most likely; your Alcatel android device has been locked-up to FRP.

Factory Reset Protection, FRP for short, is a security measure embedded on android devices. Starting from Android 4.4.4 or more commonly, Android 5.0 Lollipop, ends up in FRP when you factory-reset the phone. FRP Lock is triggered more commonly when you factory-reset such android device from the recovery or using a PC program.
In essence, FRP is there to protect unauthorised access to such android devices following a Userdata-wipe or Factory-reset operation.

How to Prevent FRP Lock Re-occurrence On your Alcatel Android Devices

It's simple. To prevent your Alcatel android device from ending up in FRP-Lock, you simply have to delete or remove any and all Google accounts associated with that device. By these, I mean all the Google accounts that are activated on your Alcatel android device.
To know how many Google accounts are associated with your Alcatel android device, go to Settings >> Accounts >> Google. Click on Google and you will be able to see the list of Google accounts already associated with your device.

How to Delete or Remove Google Account On Alcatel Android Device
1. Go to Settings >> Accounts >> Google.
2. From Google under Accounts, tap on each of the Google accounts listed and then, press/tap the Menu button or iCon.
3. From the options that show up, click Remove Account.
4. Repeat this process for every Google Accounts on your Alcatel android device until there is none left.

Now, you may peacefully proceed to wiping the userdata or factory-reset your Alcatel android device.

Recommended:

Xolo Q900 Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo Q900 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q900, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q900, Stock ROM file which can be used to flash factory OS back to your Xolo Q900.

How to Download Stock Firmware and Flash Xolo Q900 with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q900 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q900 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q900 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q900 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q900 or remove battery from it and re-insert the battery again. Connect your Xolo Q900 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q900 to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q900 using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q900



Xolo Q900s Stock Firmware, Flash File Download

Xolo Android Stock ROM Firmware PAC File
This Xolo Q900s Firmware, PAC file can be used with any service tools capable of Flashing PAC file on SpreadTRUM Android Devices.
Stock firmware are mostly needed to either upgrade or downgrade your Xolo Q900s. It can also be needed to simply flash your Xolo android device in order to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q900s Stock ROM, PAC file which can be used to flash factory OS back to your Xolo Q900s.

How to Download Latest Firmware and Flash Xolo Q900s with this PAC File

1. Download SPD Download Tool from here and install it on your PC. Also, it is a must to install SpreadTRUM Android drivers on your PC. You may Download SpreadTRUM Android Drivers here

2. Download your Xolo Q900s, latest firmware pac File from here.

3. Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program.

4. Now, Put off your Xolo Q900s or remove battery from it and re-insert the battery then, connect your Xolo Q900s Mobile Phone to the PC.

5. Now, select the specific STOCK FIRMWARE you downloaded for your Xolo Q900s android device by clicking on the Select Pack icon.

6: As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
NOTE: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.

7: Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
CONGRATULATIONS! You have now successfully flashed your Xolo Q900s android device.

For Graphical Illustration on how to flash Xolo SpreadTRUM android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Xolo Q900T Stock Firmware, Stock ROM Download

Xolo Android Stock ROM Firmware PAC File
This Xolo Q900T Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Xolo Android devices.
Stock firmware are mostly needed to either upgrade your Xolo Q900T, downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Xolo Q900T, Stock ROM file which can be used to flash factory OS back to your Xolo Q900T.

How to Download Stock Firmware and Flash Xolo Q900T with the Stock ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download your Xolo Q900T firmware, Stock ROM File from here.

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Xolo Q900T Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Xolo Q900T stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Xolo Q900T stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Xolo Q900T or remove battery from it and re-insert the battery again. Connect your Xolo Q900T Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Xolo Q900T to its factory defaults.
NOTE: if you encounter any errors while flashing your Xolo Q900T using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Xolo android devices, see here: How to Flash Xolo Android Device: Step by Step with Pictures

Also Read:

Video Tutorial: How to Flash All MTK Android Devices Including Xolo Q900T



Subscribe to: Comments (Atom)