TUTORIAL ON HOW TO FLASH A10 A13 ALLWINNER

FLASH YOUR A10 A13 ALLWINNER TABLET USING LIVESUIT!

Before Flashing, make sure you have tried the other alternatives first such as Recovery Mode, Wipe Rom Easy and Android Multi Tools. This method is only advisable if all other alternatives didn't work. Such as your USB debugging is not enabled.

Step by Step AllWinner Tablet Flashing Tutorial

1. Charge your Tablet. It must be full charged or not Low Battery.

2. Download your Firmware / Rom corresponding to your Tablet's Model at the AllWinner Rom Section.

3. Download Livesuit 1.11 by clicking here

4. Extract Zip file to your desired location (ex. Desktop)

5. Open LiveSuitPack_1.11.exe from Livesuit Folder

6. Wait for it to self extract then run Livesuit.exe as Admin

7. A pop up will appear asking if you want a guide for a upgrading. Select NO since you're using my guide.

8. Click Select Img then browse for your downloaded ROM / Firmware .img file. Open.

9. Turn off your Tablet then ready your connector.

10. Hold Volume Up button, connect the tablet to your computer then press power button multiple times slowly.

11. Pop up will appear on Livesuit asking if you want mandatory format, just click yes and yes again.

12. Wait until a pop up says "upgrade succeeds" 

Warning: Do not turn off your computer or disconnect the cable while it is flashing!

When tablet automatically boots, flashing is finished. 

You can now use your Tablet! If it does not boot, hold the power button to turn it on.

DOWNLOAD INFINIX X570 STOCK ROM / FIRMWARE

INFINIX X570 ROM

FOLOW THIS GUIDE ON HOW TO FLASH INFINIX PHONE FROM HERE

DOWNLOAD NOW

INFINIX X570 STOCK ROM

....................................................................................

infinix x570 stock rom

General Information 

SIM Dual mini SIM 

Body 

Dimensions 161 x 82.5 x 9.3 mm 

Keyboard Touchscreen 

Colors White, Black, Pink 

Cover Plastic 

Display 

Type TFT capacitive touchscreen touchsreen with 16,000,000 colors 

Size 720×1280 pixels, 5.7 inches, 257 pixels per inch (PPI) 

Memory And OS 

Card slot MicroSD, up to 32 GB 

Internal 16GB 

OS Android 4.1.2 Jelly Bean 

Processors 1.2GHz quad-core CPU 

RAM 1GB 

Audio 

Alert types Vibration, MP3 ringtones 

Loudspeaker Yes 

Audio port 3.5mm jack 

Connectivity 

2G GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps 

3G Up to 21.2 mbps uplink; Up to 5.76 mbps downlink 

4G No 

WIFI Wi-Fi 802.11 b/g/n, Wi-Fi hotspot 

Bluetooth Version 4.0 

GPS A-GPS 

NFC No 

USB MicroUSB v2.0 

Camera 

Primary 8MP, up to 2592×1944-pixel pictures,

 autofocus, geo-tagging camera with LED flash 

Video Yes 

Secondary 5MP, up to 3264×2448-pixel-pictures 

Battery 

Capacity 2600mAh Li-Ion battery 

Other Features 

Sensors Accelerometer, Proximity, Compass, Light sensor 

Messaging SMS, MMS, Email, Push Mail, IM 

Browser HTML5 

Java No 

Miscellaneous - MP3/WAV/eAAC+/WMA player

– FM Radio

– MP4/H.264/H.263/WMV player

– Document viewer/editor

– Preloaded applications –

 Google Maps, Opera Mini, Facebook, Yahoo etc. 

DOWNLOAD TECNO P6 STOCK ROM

Tutorial on how to unbrick tecno p6

• USB data cable

• MediaTek USB VCOM drivers

• SP Flash Tool ( Latest version )

• Download Tecno p6 stock rom

First of all, make sure that you have MediaTek DA USB VCOM drivers installed.


Download my  file ,create new folder on your desktop name it “tecno Flash” without quote.extract this file there.
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
for your device and ignore any message that may appear.

• Turn off your phone, remove the battery and replace it after some seconds (and don’t turn on the phone).

• Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.

The process will start and a red progress bar will appear.

• After the red progress bar is complete, there will appear a purple progress bar.

• Right after the purple progress bar is complete, a message will appear underneath it:
  “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up)

When the yellow bar is complete, you’ll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.

You can now safely disconnect your phone and turn it on. The process ends here.

	General Information
2G Network	GSM 850 / 900 / 1800 / 1900
3G Network	HSDPA 900 / 2100
4G Network	No
SIM	Dual mini SIM
Status	Available October 2014
	Body
Dimensions
Keyboard	Touchscreen
Colors	White, Black, Blue
Cover	Plastic
	Display
Type	IPS capacitive touchscreen with 16,000,000 colors
Size	4.5 inches, 540 x 960 pixels, 245 pixels per inch (PPI)
	Memory And OS
Card slot	MicroSD card, up to 32GB
Internal	8GB
OS	Android 4.4.2 KitKat
Processors	1.3GHz quad-core Cortex-A7 CPU, MediaTek MT6582 chipset, Mali-400MP2 GPU
RAM	1GB
	Audio
Alert types	Vibration, MP3 ringtones
Loudspeaker	Yes
Audio port	3.5mm jack
	Connectivity
2G	GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G	Up to 21 mbs downlink; Up to 5.76 mbs uplink
4G	No
WIFI	Wi-Fi 802.11 b/g/n, WIFI hotspot, Wi-Fi direct
Bluetooth	Yes
GPS	A-GPS
NFC	No
USB	MicroUSB v2.0
	Camera
Primary	8MP, up to 3264 x 2448-pixel pictures, HDR, autofocus, Geo-tagging, panorama camera with LED flash
Video	1080p@30fps
Secondary	Yes
	Battery
Capacity	1800mAh Li-Ion battery
Stand-by	N/a
Talk time	N/a
Music play	N/a
	Other Features
Sensors	Accelerometer, Proximity
Messaging	SMS, MMS, Email, Push Mail, IM
Browser	HTML5
Java	No
	- SNS integration – MP4/MPEG4/H.263/H.264 player – MP3/WAV/eAAC+/AC3/FLAC player – Document viewer – FM radio – Image viewer and editor – Voice memo/dial/command – Predictive text input – Preloaded apps –  Gmail, Gtalk, Google Now, Youtube, Flash Share, Facebook, Palmchat
	Price
Price level	About 150 USD

TUTORIAL ON HOW TO ROOT TECNO J7

How To Root Tecno Boom J7 Android Phone Easily Without A Computer

If you own the Tecno boom J7 android phone, here is a valid tutorial in regards rooting the Android phone. The Tecno J7 boom android device, according to the brand, is the best music phone at the moment.

Although I have no reason to doubt that, it’s actually nice to know that the device can actually be rooted easily without having to use a computer. Simply put, the Tecno boom J7 can be rooted in 3 minutes.

Rooting Tecno Boom J7 Android Phone

In rooting the Tecno J7 android phone, the basic requirements are having a fast Internet connection on the mobile phone and having kingroot rooting application installed on the Android phone.

Kingroot apk app in rooting tecno boom j7

Where Can I Download Kingroot Apk app?

You can download the app from the official website here but if you want to save yourself some stress, you can download from this Direct link here. and extract the file

Steps:

==> First and foremost, if you are just using your Android device for the first time in downloading an app from an external source, you will need to enable the functionality.

To do this, please navigate to settings > security > check Unknown Sources.

After that, installing the above kingroot app should be easy.

==> Please make sure you have a good data connection enabled on the Android phone before launching the app.

==> When your data connection has been ascertained, launch the kingroot app and tap on the blue button at the button to start rooting.

==> Depending on your network strength, the rooting process may take up to 3mins or more. But all that is required is that you wait till the reading gets to 100%.

==> When it gets to hundred and the process is complete, you should see a blue box with some Chinese words on it, just tap on it.

==> Another page on the app will be displayed to you. Wait till you get the check mark symbol on the app which means the device has been rooted.

==> When done, you should reboot the phone. When the phone is fully started, check through the apps menu and you should find KingUser app automatically installed. That shows the phone has been successfully rooted.

Confirm If Tecno Boom J7 Has Been Successfully Rooted

TODAY I WILL SHOW U HOW TO CHANGE MTK IMEI WITHOUT ROOTIN & PC

TODAY I WILL SHOW U HOW TO CHANGE MTK DROID PHONE IMEI WITHOUT ROOTING & WITHOUT PC

To change all MTK android phones IMEI no. without PC
You need to Download Mobile Uncle Tools OR mtk engineer.
Mtk Engineer

Mobileuncle English version

English version Screenshots:


App Description:
Mobileuncle Tools is power tools for MTK android device:1 display device info
2 information of device and running status
3 easy open engineer mode and MTK engineer mode
4 backup IMEI for MTK mobile
5 recovery online update
6 easy update tool via sdcard
7 Enable USB Mass Storage Device,connect cable first
8 crack operator GPRS lock for MTK
9 free the network access limited via GPRS
10 power GPS search
11 Power the gps search satellite ability
12 enable AP
13 easy reboot to recovery

Important Note:
Backup valid IMEI no
Its really difficult to get for individual, so take copy IMEI no of your old unused mobile phone, and be sure we will never switch on the phone ever again. If you switch it on, the both sim will not register to the network.
Its all done.

Instruction on how to change all MTK android phones IMEI number without PC:

Go to Engineer mode in mobile Uncle tool


Select Engineer mode[MTK]

Go to CDS information

Select Radio Information



Here you can see Phone1 and Phone2, in that select phone2, because most of the Chinese clone phone the 1st Sim which is a 3G will work perfectly. Only the problem happens when we insert the second sim. If you check you can see the IMEI of 1st sim will start with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is why the second sim is not able to register to the network, because its not in international formatted IMEI. So usually we need to change the IMEI of phone 2.


Select the phone 2



Here you can see a command line with “AT+”. Now just add this command to it
AT+EGMR=1,10,”15 digit YOUR NEW IMEI NO”
And press “send at command” button.

[ if you want to change the the phone 1 IMEI AT+EGMR=1,7,”WRITE THE NEW IMEI NO”]


Yes we all done… now you can restart the phone and check the IMEI by pressing *#06#

NOKIA C1 RUNNING ANDROID 6.0 Marshmallow

             Nokia C1 Android Smartphone Images Leaked & Specifications 

by julius slim 

nokia has plan not to revile NOKIA C1 UNTIL NEXT YEAR 2016

Earlier this year Nokia confirmed that it plans to return to the smartphone business, and soon after, revealed it was looking for a 'world-class partner' to manufacturing, sales, and marketing of the product. While the company is contractually barred from selling, or manufacturing smartphones until Q4 2016, a bunch of leaked images tip that the company has already started to work on an Android-powered smartphone.
Live images of what appears to be the long-rumoured Nokia C1 have reportedly leaked (pictured below) on the Web, revealing a similar design to the Xiaomi Mi 4i handset, and a standard camera setup on the back. Separately, an alleged press render of the handset was leaked last week (pictured above), in line with the live images and also showing an iPhone-esque speaker grille at the bottom, also seen on the Nokia N1 tablet released earlier this year. Newer reports however point to the render image being fake.
Specifications of the Nokia C1 were tipped alongside, including a 5-inch FHD display, an 8-megapixel rear camera, and a 5-megapixel front-facing shooter. It is said to run on Android 6.0 Marshmallow, as per the leak. Previous reports have suggested that the Nokia C1 will be powered by an Intel chipset and feature 2GB of RAM.
(Also see: Opinion - Should Nokia Fans Celebrate the Brand's Return to Smartphones?)
It needs to be pointed out that Nokia can't use its brand on smartphones until Q4 2016, because of the acquisition of its devices and services division by Microsoft. Earlier this year, Nokia announced that it intends to get back in the smartphone business by licensing designs to hardware manufacturers. The Finnish-based technology company, which once held the pole position in the mobile handset market, lost its dominance when it decided to ship Windows Phone-powered handsets instead of Android. The company's new handsets would run Android.

HOW TO UNBRICK INFINIX X509 ZERO 2 32GB

LEARN HOW TO UNBRICK INFINIX ZERO 2 {32GB}

DOWNLOAD THE STOCK ROM FROM HERE

• USB data cable

• MediaTek USB VCOM drivers

• SP Flash Tool ( Latest version )

First of all, make sure that you have MediaTek DA USB VCOM drivers installed.

Flashing the whole ROM

First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(visit our download page to download your own infinix ROM model)

Download my  file ,create new folder on your desktop name it “Infinix Flash” without quote.extract this file there.

for your device and ignore any message that may appear.

• Turn off your phone, remove the battery and replace it after some seconds (and don’t turn on the phone).

• Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.

The process will start and a red progress bar will appear.

• After the red progress bar is complete, there will appear a purple progress bar.

• Right after the purple progress bar is complete, a message will appear underneath it:
  “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up)

When the yellow bar is complete, you’ll get a popup with a green circle and Download OK message,
which means that the process has been successfully terminated.

You can now safely disconnect your phone and turn it on. The process ends here.

• Please note that, even though it isn’t mandatory to select it on the list of images to flash,
  preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.

Attention : Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.