BluBoo X1s Stock ROM Firmware (Flash File) Download

Here is a BluBoo X1s Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X1s of this exact variant. Any MTK Flash tools can download and flash this BluBoo X1s flash file on your X1s so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X1s flash file, if properly used, can unbrick (debrick) your X1s and also corrects any software issues your BluBoo X1s may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X1s using any MTK flash tool, your BluBoo X1s will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X1s is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X1s Stock ROM Firmware Download Link(s)

1. BluBoo X1s Stock ROM

How to Flash Stock Firmware On BluBoo X1s

1. Download your BluBoo X1s stock ROM firmware from the link above.

2. Extract the BluBoo X1s Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X1s.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X1s.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X1s, if need be.

Celkon Q599 Stock ROM Firmware (Flash File) Download

To flash your Celkon Q599, you need to download the Celkon Q599 stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Celkon Q599.

Please note that flashing this Stock ROM Firmware on your Celkon Q599 will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.

Note: If your Q599 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Celkon Q599 Stock ROM Firmware Download Link(s)

1. Celkon Q599_v08_20160913_1530

How to Flash Stock Firmware On Celkon Q599

1. Download your Celkon Q599 stock ROM firmware from the link above.

2. Extract the Celkon Q599 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here

4. Now, choose either of the tools listed below here to load the stock firmware on your Celkon Q599.

1. Miracle Box

2. Research Download Tool

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Celkon Q599.

2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Celkon Q599, if need be.

BluBoo X2 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X2 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X2 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X2 flash file on your X2 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X2 flash file, if properly used, can unbrick (debrick) your X2 and also corrects any software issues your BluBoo X2 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X2 using any MTK flash tool, your BluBoo X2 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X2 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X2 Stock ROM Firmware Download Link(s)

1. BluBoo X2 Stock ROM

2. BluBoo X2 (Android 4.4.2) Stock ROM

How to Flash Stock Firmware On BluBoo X2

1. Download your BluBoo X2 stock ROM firmware from the link above.

2. Extract the BluBoo X2 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X2.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X2.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X2, if need be.

Celkon Q4G Tab 7 Stock ROM Firmware (Flash File) Download

Here is a Celkon Q4G Tab 7 Stock ROM Firmware which can be used to load and flash stock firmware on any Celkon Q4G Tab 7 of this exact variant. Any MTK Flash tools can download and flash this Celkon Q4G Tab 7 flash file on your Q4G Tab 7 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Q4G Tab 7 flash file, if properly used, can unbrick (debrick) your Q4G Tab 7 and also corrects any software issues your Celkon Q4G Tab 7 may currently have. Also, keep in mind that when you load stock firmware on your Celkon Q4G Tab 7 using any MTK flash tool, your Celkon Q4G Tab 7 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Q4G Tab 7 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Celkon Q4G Tab 7 Stock ROM Firmware Download Link(s)

1. Celkon Q4G Tab 7_0502L422A_U76T_QM715W18F35T40E8L8E_G130_IND

How to Flash Stock Firmware On Celkon Q4G Tab 7

1. Download your Celkon Q4G Tab 7 stock ROM firmware from the link above.

2. Extract the Celkon Q4G Tab 7 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Celkon Q4G Tab 7.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Celkon Q4G Tab 7.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Celkon Q4G Tab 7, if need be.

BluBoo X3 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X3 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X3 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X3 flash file on your X3 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X3 flash file, if properly used, can unbrick (debrick) your X3 and also corrects any software issues your BluBoo X3 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X3 using any MTK flash tool, your BluBoo X3 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X3 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X3 Stock ROM Firmware Download Link(s)

1. BluBoo X3 Stock ROM

2. BluBoo X3 (Android 4.4.2) Stock ROM

How to Flash Stock Firmware On BluBoo X3

1. Download your BluBoo X3 stock ROM firmware from the link above.

2. Extract the BluBoo X3 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X3.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X3.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X3, if need be.

BluBoo X4 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X4 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X4 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X4 flash file on your X4 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X4 flash file, if properly used, can unbrick (debrick) your X4 and also corrects any software issues your BluBoo X4 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X4 using any MTK flash tool, your BluBoo X4 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X4 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X4 Stock ROM Firmware Download Link(s)

1. BluBoo X4 Stock ROM

How to Flash Stock Firmware On BluBoo X4

1. Download your BluBoo X4 stock ROM firmware from the link above.

2. Extract the BluBoo X4 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X4.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X4.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X4, if need be.

BluBoo X550 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X550 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X550 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X550 flash file on your X550 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X550 flash file, if properly used, can unbrick (debrick) your X550 and also corrects any software issues your BluBoo X550 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X550 using any MTK flash tool, your BluBoo X550 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X550 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X550 Stock ROM Firmware Download Link(s)

1. BluBoo X550_21 150923

How to Flash Stock Firmware On BluBoo X550

1. Download your BluBoo X550 stock ROM firmware from the link above.

2. Extract the BluBoo X550 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X550.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X550.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X550, if need be.

BluBoo X6 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X6 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X6 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X6 flash file on your X6 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X6 flash file, if properly used, can unbrick (debrick) your X6 and also corrects any software issues your BluBoo X6 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X6 using any MTK flash tool, your BluBoo X6 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X6 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X6 Stock ROM Firmware Download Link(s)

1. BluBoo X6 Android 4.4.4

How to Flash Stock Firmware On BluBoo X6

1. Download your BluBoo X6 stock ROM firmware from the link above.

2. Extract the BluBoo X6 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X6.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X6.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X6, if need be.

Huawei Ascend G700 U10 Stock ROM Firmware (Flash File) Download

Here is a Huawei Ascend G700 U10 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Ascend G700 U10 of this exact variant. Any MTK Flash tools can download and flash this Huawei Ascend G700 U10 flash file on your Ascend G700 U10 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Ascend G700 U10 flash file, if properly used, can unbrick (debrick) your Ascend G700 U10 and also corrects any software issues your Huawei Ascend G700 U10 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Ascend G700 U10 using any MTK flash tool, your Huawei Ascend G700 U10 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Ascend G700 U10 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend G700 U10 Stock ROM Firmware Download Link(s)

1. Huawei Ascend G700 U10_V100R001C00B115CUSTC151D001 India

How to Flash Stock Firmware On Huawei Ascend G700 U10

1. Download your Huawei Ascend G700 U10 stock ROM firmware from the link above.

2. Extract the Huawei Ascend G700 U10 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend G700 U10.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend G700 U10.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend G700 U10, if need be.

BluBoo X6 Plus Stock ROM Firmware (Flash File) Download

Here is a BluBoo X6 Plus Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X6 Plus of this exact variant. Any MTK Flash tools can download and flash this BluBoo X6 Plus flash file on your X6 Plus so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X6 Plus flash file, if properly used, can unbrick (debrick) your X6 Plus and also corrects any software issues your BluBoo X6 Plus may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X6 Plus using any MTK flash tool, your BluBoo X6 Plus will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X6 Plus is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X6 Plus Stock ROM Firmware Download Link(s)

1. BluBoo X6 Plus

How to Flash Stock Firmware On BluBoo X6 Plus

1. Download your BluBoo X6 Plus stock ROM firmware from the link above.

2. Extract the BluBoo X6 Plus Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X6 Plus.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X6 Plus.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X6 Plus, if need be.

Huawei Holly U19 Stock ROM Firmware (Flash File) Download

Here is a Huawei Holly U19 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Holly U19 of this exact variant. Any MTK Flash tools can download and flash this Huawei Holly U19 flash file on your Holly U19 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Holly U19 flash file, if properly used, can unbrick (debrick) your Holly U19 and also corrects any software issues your Huawei Holly U19 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Holly U19 using any MTK flash tool, your Huawei Holly U19 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Holly U19 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Holly U19 Stock ROM Firmware Download Link(s)

1. Huawei Holly U19_V100R001C583B105_05021QUS_Channel_India_others

How to Flash Stock Firmware On Huawei Holly U19

1. Download your Huawei Holly U19 stock ROM firmware from the link above.

2. Extract the Huawei Holly U19 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Holly U19.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Holly U19.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Holly U19, if need be.

BluBoo X6 Pro Stock ROM Firmware (Flash File) Download

Here is a BluBoo X6 Pro Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X6 Pro of this exact variant. Any MTK Flash tools can download and flash this BluBoo X6 Pro flash file on your X6 Pro so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X6 Pro flash file, if properly used, can unbrick (debrick) your X6 Pro and also corrects any software issues your BluBoo X6 Pro may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X6 Pro using any MTK flash tool, your BluBoo X6 Pro will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X6 Pro is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X6 Pro Stock ROM Firmware Download Link(s)

1. BluBoo X6 Pro

How to Flash Stock Firmware On BluBoo X6 Pro

1. Download your BluBoo X6 Pro stock ROM firmware from the link above.

2. Extract the BluBoo X6 Pro Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X6 Pro.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X6 Pro.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X6 Pro, if need be.

Huawei Ascend Y220 Stock ROM Firmware (Flash File) Download

Here is a Huawei Ascend Y220 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Ascend Y220 of this exact variant. Any MTK Flash tools can download and flash this Huawei Ascend Y220 flash file on your Ascend Y220 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Ascend Y220 flash file, if properly used, can unbrick (debrick) your Ascend Y220 and also corrects any software issues your Huawei Ascend Y220 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Ascend Y220 using any MTK flash tool, your Huawei Ascend Y220 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Ascend Y220 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend Y220 Stock ROM Firmware Download Link(s)

1. Huawei Ascend Y220_U10V100R001C474B203 (OTA)

2. Huawei Ascend Y220_U10V100R001C474B203 _USB

How to Flash Stock Firmware On Huawei Ascend Y220

1. Download your Huawei Ascend Y220 stock ROM firmware from the link above.

2. Extract the Huawei Ascend Y220 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend Y220.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend Y220.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend Y220, if need be.

BluBoo X9 Stock ROM Firmware (Flash File) Download

Here is a BluBoo X9 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo X9 of this exact variant. Any MTK Flash tools can download and flash this BluBoo X9 flash file on your X9 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X9 flash file, if properly used, can unbrick (debrick) your X9 and also corrects any software issues your BluBoo X9 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo X9 using any MTK flash tool, your BluBoo X9 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X9 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo X9 Stock ROM Firmware Download Link(s)

1. BluBoo X9_MT6753

How to Flash Stock Firmware On BluBoo X9

1. Download your BluBoo X9 stock ROM firmware from the link above.

2. Extract the BluBoo X9 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo X9.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo X9.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo X9, if need be.

Huawei Ascend G700 T00 Stock ROM Firmware (Flash File) Download

Here is a Huawei Ascend G700 T00 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Ascend G700 T00 of this exact variant. Any MTK Flash tools can download and flash this Huawei Ascend G700 T00 flash file on your Ascend G700 T00 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Ascend G700 T00 flash file, if properly used, can unbrick (debrick) your Ascend G700 T00 and also corrects any software issues your Huawei Ascend G700 T00 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Ascend G700 T00 using any MTK flash tool, your Huawei Ascend G700 T00 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Ascend G700 T00 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend G700 T00 Stock ROM Firmware Download Link(s)

1. Huawei Ascend G700 T00_V100R001CHNC01B141

How to Flash Stock Firmware On Huawei Ascend G700 T00

1. Download your Huawei Ascend G700 T00 stock ROM firmware from the link above.

2. Extract the Huawei Ascend G700 T00 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend G700 T00.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend G700 T00.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend G700 T00, if need be.

BluBoo Xfire Stock ROM Firmware (Flash File) Download

Here is a BluBoo Xfire Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo Xfire of this exact variant. Any MTK Flash tools can download and flash this BluBoo Xfire flash file on your Xfire so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Xfire flash file, if properly used, can unbrick (debrick) your Xfire and also corrects any software issues your BluBoo Xfire may currently have. Also, keep in mind that when you load stock firmware on your BluBoo Xfire using any MTK flash tool, your BluBoo Xfire will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Xfire is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo Xfire Stock ROM Firmware Download Link(s)

1. BluBoo Xfire_150929 (Android 5.1)

How to Flash Stock Firmware On BluBoo Xfire

1. Download your BluBoo Xfire stock ROM firmware from the link above.

2. Extract the BluBoo Xfire Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo Xfire.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo Xfire.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo Xfire, if need be.

Huawei Ascend Y210 Stock ROM Firmware (Flash File) Download

Here is a Huawei Ascend Y210 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Ascend Y210 of this exact variant. Any MTK Flash tools can download and flash this Huawei Ascend Y210 flash file on your Ascend Y210 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Ascend Y210 flash file, if properly used, can unbrick (debrick) your Ascend Y210 and also corrects any software issues your Huawei Ascend Y210 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Ascend Y210 using any MTK flash tool, your Huawei Ascend Y210 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Ascend Y210 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend Y210 Stock ROM Firmware Download Link(s)

1. Huawei Ascend Y210_U8685D

How to Flash Stock Firmware On Huawei Ascend Y210

1. Download your Huawei Ascend Y210 stock ROM firmware from the link above.

2. Extract the Huawei Ascend Y210 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend Y210.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend Y210.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend Y210, if need be.

BluBoo XPlus 4.0 Stock ROM Firmware (Flash File) Download

Here is a BluBoo XPlus 4.0 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo XPlus 4.0 of this exact variant. Any MTK Flash tools can download and flash this BluBoo XPlus 4.0 flash file on your XPlus 4.0 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this XPlus 4.0 flash file, if properly used, can unbrick (debrick) your XPlus 4.0 and also corrects any software issues your BluBoo XPlus 4.0 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo XPlus 4.0 using any MTK flash tool, your BluBoo XPlus 4.0 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your XPlus 4.0 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo XPlus 4.0 Stock ROM Firmware Download Link(s)

1. BluBoo XPlus 4.0

How to Flash Stock Firmware On BluBoo XPlus 4.0

1. Download your BluBoo XPlus 4.0 stock ROM firmware from the link above.

2. Extract the BluBoo XPlus 4.0 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo XPlus 4.0.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo XPlus 4.0.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo XPlus 4.0, if need be.

Huawei Ascend P7 L10 Stock ROM Firmware (Flash File) Download

Here is a Huawei Ascend P7 L10 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei Ascend P7 L10 of this exact variant. Any MTK Flash tools can download and flash this Huawei Ascend P7 L10 flash file on your Ascend P7 L10 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Ascend P7 L10 flash file, if properly used, can unbrick (debrick) your Ascend P7 L10 and also corrects any software issues your Huawei Ascend P7 L10 may currently have. Also, keep in mind that when you load stock firmware on your Huawei Ascend P7 L10 using any MTK flash tool, your Huawei Ascend P7 L10 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Ascend P7 L10 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend P7 L10 Stock ROM Firmware Download Link(s)

1. Huawei Ascend P7 L10_V100R001C00B121SP01_North_America EMUI 2.3_05012KBR_05012HKK

2. Huawei Ascend P7 L10_V100R001C00B133SP01_West_European EMUI 2.3_05012HCE

How to Flash Stock Firmware On Huawei Ascend P7 L10

1. Download your Huawei Ascend P7 L10 stock ROM firmware from the link above.

2. Extract the Huawei Ascend P7 L10 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend P7 L10.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend P7 L10.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend P7 L10, if need be.

BluBoo XTouch Stock ROM Firmware (Flash File) Download

Here is a BluBoo XTouch Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo XTouch of this exact variant. Any MTK Flash tools can download and flash this BluBoo XTouch flash file on your XTouch so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this XTouch flash file, if properly used, can unbrick (debrick) your XTouch and also corrects any software issues your BluBoo XTouch may currently have. Also, keep in mind that when you load stock firmware on your BluBoo XTouch using any MTK flash tool, your BluBoo XTouch will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your XTouch is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo XTouch Stock ROM Firmware Download Link(s)

1. BluBoo XTouch Android 5.1

How to Flash Stock Firmware On BluBoo XTouch

1. Download your BluBoo XTouch stock ROM firmware from the link above.

2. Extract the BluBoo XTouch Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo XTouch.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo XTouch.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo XTouch, if need be.

Huawei G730 U10 Stock ROM Firmware (Flash File) Download

Here is a Huawei G730 U10 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei G730 U10 of this exact variant. Any MTK Flash tools can download and flash this Huawei G730 U10 flash file on your G730 U10 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this G730 U10 flash file, if properly used, can unbrick (debrick) your G730 U10 and also corrects any software issues your Huawei G730 U10 may currently have. Also, keep in mind that when you load stock firmware on your Huawei G730 U10 using any MTK flash tool, your Huawei G730 U10 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your G730 U10 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei G730 U10 Stock ROM Firmware Download Link(s)

1. Huawei G730 U10_V100R001C00B112CUSTC428D001_Channel_india_others

How to Flash Stock Firmware On Huawei G730 U10

1. Download your Huawei G730 U10 stock ROM firmware from the link above.

2. Extract the Huawei G730 U10 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei G730 U10.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei G730 U10.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei G730 U10, if need be.

BluBoo T3110 Stock ROM Firmware (Flash File) Download

Here is a BluBoo T3110 Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo T3110 of this exact variant. Any MTK Flash tools can download and flash this BluBoo T3110 flash file on your T3110 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this T3110 flash file, if properly used, can unbrick (debrick) your T3110 and also corrects any software issues your BluBoo T3110 may currently have. Also, keep in mind that when you load stock firmware on your BluBoo T3110 using any MTK flash tool, your BluBoo T3110 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your T3110 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo T3110 Stock ROM Firmware Download Link(s)

1. BluBoo T3110_D03_A.B_V1.0_0312

How to Flash Stock Firmware On BluBoo T3110

1. Download your BluBoo T3110 stock ROM firmware from the link above.

2. Extract the BluBoo T3110 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo T3110.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo T3110.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo T3110, if need be.

Huawei G750 U10 Stock ROM Firmware (Flash File) Download

Here is a Huawei G750 U10 Stock ROM Firmware which can be used to load and flash stock firmware on any Huawei G750 U10 of this exact variant. Any MTK Flash tools can download and flash this Huawei G750 U10 flash file on your G750 U10 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this G750 U10 flash file, if properly used, can unbrick (debrick) your G750 U10 and also corrects any software issues your Huawei G750 U10 may currently have. Also, keep in mind that when you load stock firmware on your Huawei G750 U10 using any MTK flash tool, your Huawei G750 U10 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your G750 U10 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei G750 U10 Stock ROM Firmware Download Link(s)

1. Huawei G750 U10_V100R001C00B115CUSTC428D001_Channel_05021mwd

How to Flash Stock Firmware On Huawei G750 U10

1. Download your Huawei G750 U10 stock ROM firmware from the link above.

2. Extract the Huawei G750 U10 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei G750 U10.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei G750 U10.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei G750 U10, if need be.

BluBoo Maya Stock ROM Firmware (Flash File) Download

Here is a BluBoo Maya Stock ROM Firmware which can be used to load and flash stock firmware on any BluBoo Maya of this exact variant. Any MTK Flash tools can download and flash this BluBoo Maya flash file on your Maya so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Maya flash file, if properly used, can unbrick (debrick) your Maya and also corrects any software issues your BluBoo Maya may currently have. Also, keep in mind that when you load stock firmware on your BluBoo Maya using any MTK flash tool, your BluBoo Maya will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Maya is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

BluBoo Maya Stock ROM Firmware Download Link(s)

1. BluBoo Maya_V178C_HD_M_V1.0_0923_V1.0.2

2. BluBoo Maya_V178C_HD_M_V1.0_V1.2.4

How to Flash Stock Firmware On BluBoo Maya

1. Download your BluBoo Maya stock ROM firmware from the link above.

2. Extract the BluBoo Maya Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your BluBoo Maya.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your BluBoo Maya.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your BluBoo Maya, if need be.

Huawei Honor Cherry L04 Stock ROM (Flash File) Download

If you notice any software malfunctions with your Huawei Honor Cherry L04 android device, you're most likely required to download and flash stock ROM firmware on your Honor Cherry L04 to permanently correct the software errors you noticed on your Huawei Honor Cherry L04. And when you load stock firmware on your Huawei Honor Cherry L04 using any Qualcomm flash tool, your Huawei Honor Cherry L04 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Honor Cherry L04 Stock ROM Firmware Download Link(s)

1. Huawei Honor Cherry L04_V100R00C900B150_India Kitkat_EMUI

How to Flash Stock Firmware On Huawei Honor Cherry L04

1. Download your Huawei Honor Cherry L04 stock ROM firmware from the link above.

2. Extract the Huawei Honor Cherry L04 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Honor Cherry L04.

1. Tool Studio eMMC Download Tool

2. QPST QFIL Qualcomm Flash Tool

3. GNQC Qualcomm Flash Image Loader

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Honor Cherry L04.

2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Honor Cherry L04, if need be.

Celkon Q4G Plus Stock ROM Firmware (Flash File) Download

Here is a Celkon Q4G Plus Stock ROM Firmware which can be used to load and flash stock firmware on any Celkon Q4G Plus of this exact variant. Any MTK Flash tools can download and flash this Celkon Q4G Plus flash file on your Q4G Plus so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Q4G Plus flash file, if properly used, can unbrick (debrick) your Q4G Plus and also corrects any software issues your Celkon Q4G Plus may currently have. Also, keep in mind that when you load stock firmware on your Celkon Q4G Plus using any MTK flash tool, your Celkon Q4G Plus will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Q4G Plus is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Celkon Q4G Plus Stock ROM Firmware Download Link(s)

1. Celkon Q4G Plus_v02_Grey_Color_Software

How to Flash Stock Firmware On Celkon Q4G Plus

1. Download your Celkon Q4G Plus stock ROM firmware from the link above.

2. Extract the Celkon Q4G Plus Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Celkon Q4G Plus.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Celkon Q4G Plus.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Celkon Q4G Plus, if need be.

Celkon A333 Stock ROM Firmware (Flash File) Download

To flash your Celkon A333, you need to download the Celkon A333 stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Celkon A333.

Please note that flashing this Stock ROM Firmware on your Celkon A333 will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.

Note: If your A333 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Celkon A333 Stock ROM Firmware Download Link(s)

1. Celkon A333_V02

How to Flash Stock Firmware On Celkon A333

1. Download your Celkon A333 stock ROM firmware from the link above.

2. Extract the Celkon A333 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here

4. Now, choose either of the tools listed below here to load the stock firmware on your Celkon A333.

1. Miracle Box

2. Research Download Tool

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Celkon A333.

2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Celkon A333, if need be.

Vivo Y11 Stock ROM Firmware (Flash File) Download

Here is a Vivo Y11 Stock ROM Firmware which can be used to load and flash stock firmware on any Vivo Y11 of this exact variant. Any MTK Flash tools can download and flash this Vivo Y11 flash file on your Y11 so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this Y11 flash file, if properly used, can unbrick (debrick) your Y11 and also corrects any software issues your Vivo Y11 may currently have. Also, keep in mind that when you load stock firmware on your Vivo Y11 using any MTK flash tool, your Vivo Y11 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your Y11 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Vivo Y11 Stock ROM Firmware Download Link(s)

1. Vivo Y11_PD1224T_A_1.17.0_R70020_MT6577

2. Vivo Y11_PD1224CW_EX_A_1.6.14_V2.46_MT6582

3. Vivo Y11_PD124CW_EX_B_2.2.5_V2.46_MT6582

How to Flash Stock Firmware On Vivo Y11

1. Download your Vivo Y11 stock ROM firmware from the link above.

2. Extract the Vivo Y11 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Vivo Y11.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Vivo Y11.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Vivo Y11, if need be.

Huawei Ascend G620s UL00 Stock ROM (Flash File) Download

If you notice any software malfunctions with your Huawei Ascend G620s UL00 android device, you're most likely required to download and flash stock ROM firmware on your Ascend G620s UL00 to permanently correct the software errors you noticed on your Huawei Ascend G620s UL00. And when you load stock firmware on your Huawei Ascend G620s UL00 using any Qualcomm flash tool, your Huawei Ascend G620s UL00 will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Huawei Ascend G620s UL00 Stock ROM Firmware Download Link(s)

1. Huawei Ascend G620s UL00_V100R001C636B264CUSTC636D002

How to Flash Stock Firmware On Huawei Ascend G620s UL00

1. Download your Huawei Ascend G620s UL00 stock ROM firmware from the link above.

2. Extract the Huawei Ascend G620s UL00 Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Huawei Ascend G620s UL00.

1. Tool Studio eMMC Download Tool

2. QPST QFIL Qualcomm Flash Tool

3. GNQC Qualcomm Flash Image Loader

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Huawei Ascend G620s UL00.

2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Huawei Ascend G620s UL00, if need be.

Celkon A418 Plus Stock ROM Firmware (Flash File) Download

To flash your Celkon A418 Plus, you need to download the Celkon A418 Plus stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Celkon A418 Plus.

Please note that flashing this Stock ROM Firmware on your Celkon A418 Plus will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.

Note: If your A418 Plus is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Celkon A418 Plus Stock ROM Firmware Download Link(s)

1. Celkon A418 Plus_V08

How to Flash Stock Firmware On Celkon A418 Plus

1. Download your Celkon A418 Plus stock ROM firmware from the link above.

2. Extract the Celkon A418 Plus Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here

4. Now, choose either of the tools listed below here to load the stock firmware on your Celkon A418 Plus.

1. Miracle Box

2. Research Download Tool

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Celkon A418 Plus.

2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Celkon A418 Plus, if need be.

Vivo X3S Stock ROM Firmware (Flash File) Download

Here is a Vivo X3S Stock ROM Firmware which can be used to load and flash stock firmware on any Vivo X3S of this exact variant. Any MTK Flash tools can download and flash this Vivo X3S flash file on your X3S so long as that MTK Flash Tool supports MTK Scatter File.

Since most major software malfunctions on any MTK Android devices can only be corrected by flashing, this X3S flash file, if properly used, can unbrick (debrick) your X3S and also corrects any software issues your Vivo X3S may currently have. Also, keep in mind that when you load stock firmware on your Vivo X3S using any MTK flash tool, your Vivo X3S will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.

Note: If your X3S is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.

Vivo X3S Stock ROM Firmware Download Link(s)

1. Vivo X3S_173942_PD1227BW_A_1.20.2_MT6592

How to Flash Stock Firmware On Vivo X3S

1. Download your Vivo X3S stock ROM firmware from the link above.

2. Extract the Vivo X3S Firmware you downloaded from the link above onto a folder on your PC.

3. Download and install MTK android device drivers on your PC. You may skip this step if you have installed MTK drivers on your PC already otherwise, download MTK drivers here

4. Now, choose either of the tools listed below here to load the stock firmware on your Vivo X3S.

1. SP Flash Tools

2. NCK Box

3. Miracle Box

See video tutorial here: How to Flash MTK Android Devices Video Tutorial

Note

1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Vivo X3S.

2. If your device is bricked already, I recommend that you use NCK Box or SP Flash. Both are the safest toolS for flashing MTK Android devices.

3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Vivo X3S, if need be.