8 Ways to Make Money from Mobile Phones SESE

It is one thing to have an opportunity, it is something else entirely to utilize it. Here, I reveal eight (8) things you can do to make money in the upcoming Mobile Phones SESE event initiated by Aryk Enterprise.
In case you do not know what the Mobile Phones SESE is, it is an event, a kind of Seminar And Expo initiated by Aryk Enterprise targeted at all mobile phones users across Nigeria.

The event, Mobile Phones SESE is initiated to help educate and train interested individuals how to become a Mobile Phones Software Engineer and give them all the tools they need to start up as a mobile phones software engineer.

In addition to the training, you can buy, sell, and swap phones and gadgets at the event. Also, courtesy of Aryk Enterprise, you can bring your android devices for free repairs (Software Problems ONLY).
Click here for details about the event and all you stand to gain.

8 Ways to Make Money In The Mobile Phones SESE Event

1- Be Educated to Practice: the major reason that give birth to this event is to train and educate interested individuals how to handling software related problems of mobile phones thereby becoming a mobile phones software engineer.
Meanwhile, at the event, you can also start practising what you have learnt at the seminar thereby making money off your knowledge.

2- Bulk Purchase/Resell Chances: at the event ground, there are provisions for PCs and mobile phones enhancements such as SD Card (Memory Card) and Flash Drives (USB Disk) to be sold at very cheap prices. You can buy these enhancements in bulk and resell them at your various destinations in unit and at usual prices.

E.g
32GB flash drive (USB Disk) would be sold N2,500 that day. And 32GB SD Card (Memory Card) would be sold N2,300 that day. Both with 6month warranty.

You may buy these items and resell each of them for as high as N3,500 at your various destination.

3- Trade Your Phones And Gadgets: the idea of swapping phones is highly welcomed among mobile phones users in Nigeria. You can also make a reasonable amount of money in this regard at the event.

4- Free Browsing Cheats: I am sure you are aware that free browsing cheats have become hot cakes among mobile phones users in Nigeria especially now that android is setting the pace.

If you know one or two free browsing cheats, you can make a huge amount of money giving out free browsing cheats that day.

5- Phone Repairs And Services: if you are already an engineer, you are welcome on board. As an engineer, you can also be part of the event repairing phones and in so doing, making your cool money.

6- Android Games And Softwares: needless to say much on this since almost everybody knows how badly people wants good android games. If you have enough android games, you can bring them along and make your money that day.

7- Connections: this is one of the most important reasons why you must be at the event though, it is second to the last on this list, because only few people knows how to utilize the connections they have.

On the event, many engineers and individuals are coming. Make good connections for this is your wealth.

8- iPhone Basebands: although, most people are not concerned with this, it should be included.
If you have any iPhones and iPads that uses SIM card, please bring them along with you.

We all know how difficult it is to unlock iCloud or Activate/Hacktivate iPhones and iPads that are locked. We ONLY want to extract some files within them for development purposes ONLY (to improve Aryk Enterprise iCloud/Activation) services. We shall pay you a reasonable amount of money (based on our negotiation) before the extraction.

If you have any opinions or comments to add, please, kindly use the comment box below.

Ubuntu OS, Full Featured Free Linux Distribution: Download Here

If you have ever wondered if you can run a Linux OS alongside your Windows OS on your laptop, well, your answer is YES! You can load Ubuntu OS on your Windows PC and enjoy all the features of a Linux computer on your laptop without the fear of loosing any of the data you already have on your PC.
Here within this page, we discuss few of the features of the Ubuntu OS and a download link is provided for those who might want to try it out.

What is Ubuntu OS?
To put simply, Ubuntu OS is an operating system (OS) designed with all the features and functionalities of a Linux computer. In the hingsight, Ubuntu OS is a free Linux distribution that brings you to the world of Linux computers.

Features of the Ubuntu OS
Besides all the beauties and functionalities of other Linux computers the Ubuntu OS is stuffed with, the OS also has its distinct features that would make your experience of the Ubuntu OS a beautiful one.

For optimal performance, you should load Ubuntu 64-bit if you have a PC that has 2GiB of RAM and above. And 32-bit should be loaded if you have a PC that has less than 2GiB of RAM.

Dowload Ubuntu from this Link

For any comments or questions over this article please, use the comment box bellow or contact us Via This Link. And if your questions is not about this article and needs our help over something related, Find Us on Facebook. Got any other info you want us discuss? Share it with us using the comment box or contact us!

How to Troubleshoot HTC hboot.zip Errors: Flashable Recovery & Bootloader Zip

For most HTC android devices that has S-Off, there is a flexible option for you to flash either the recovery.img or bootloader file in an hboot.zip file via your HTC android device's hboot.
For example: if you wish to flash a custom recovery on your HTC G2, you can simply do so by downloading a PC10IMG.zip file that contains the custom recovery.img of your choice and flash it via the hboot on the HTC vision also known as T-Mobile G2.

This note is published to help you troubleshoot some known flashing errors you might encounter during the flashing process.

Lately, we have received some complains about the inability to flash some of the hboot.zip files we have provided on this blog and so, we bring you some troubleshooting solutions as expected.

Troubleshooting Known Errors At Flashing Hboot.zip Files On HTC Androids

The ONLY error that has being reported so far is that some of the HTC hboot.zip files are either hidden on the phone, or that the phone could not locate them on the SD Card while the phone is booted to hboot mode.

In hboot mode, the phone only scans the SD Card for the hboot.zip file (e.g PH85IMG.zip) and nothing is found. Then, nothing happens.

- one of our fans commented.

If you ecounter this kind of problem, the only solution is either to;

1- Format the SD Card, then put the hboot.zip file (e.g PH85IMG.zip) on the root of the SD Card and retry the process.

Or,

2- Put the hboot.zip file on the root of another SD Card and retry the process.

With this, the hboot.zip file should work for your HTC android device. If otherwise, your HTC android device probably has S-On or that the CIDNum of your device is not contained in the hboot.zip file. In cases like that, you may contact us for further assistance.

How to Burn A DataDISC Using Ubuntu -Linux PC

There might be a need for you to burn a DataDisc, if you are opportuned to have a machine running Ubuntu 14.0.4, you do not need to search any further, simply put on your PC and start burning as much as you want using Brasero DiskBurner!
Brasero DiskBurner is a utility program that comes with the Ubuntu 14.0.4 and has all the common functions most other DiskBurner programs do have.
How to Use the Brasero DiskBurner
Burning a disk using the Brasero DiskBurner is really simple and easy. All you will have to do is to lunch the Brasero program on your Ubuntu 14.0.4.

To lunch the Brasero DiskBurner on your Ubuntu 14.0.4, simply use the search button on your Ubuntu machine as in the image below.

Once the Brasero DiskBurner has been lunched, simply select the operation you wish to perform and go.
The friendly guides on the Brasero DiskBurner would put through the rest of the operation.

The Best Way to Flash MIUI ROMs

When it comes to good and stable custom ROMs avilable for the android devices, I am sure MIUI ROMs are one of the best ROMs available.
However, the only problem you might have using the MIUI ROM is the SPEED. Although, you will enjoy using MIUI ROM with just the built-in apps but becomes very slow as you load more apps on it.

Here, we discuss the best way to flash the MIUI ROM on your android device having no fear of its speed no matter how many apps you install on it.

The Best Practice to Flashing MIUI ROM

Please note that you should always make a backup of your previous ROM before you flash another ROM -just in case something goes wrong with the newly flashed ROM.

1- First, you need a custom recovery on your android device. The best custom recovery for flashing MIUI ROMs is 4EXT recovery.
Click here for info on how to flash custom recovery on your android device.

2- Download the version of MIUI ROM you wish to flash on your phone.
Please note that the ROM must be the exact ROM for your phone.

3- Download the normal Google Apps, Gapps for the version of ROM you have downloaded.
Detailed info about Gapps and the version to download is here.

4- Put both the ROM and the Gapps .zip files on the root of your SD Card.

5- Boot your phone to the recovery using the right key combinations for the phone or using Terminal/Command Prompt.

6- On the 4EXT recovery, go to Wipe!Format, then Format All Partitions (except SD Card) option. -note that this will erase everything on your phone except your memory card.

7- Now, go back to the main 4EXT recovery screen and click on Install from SD Card. Select the ROM you downloaded on your SD Card and flash it.

8- Once the flashing process completes, reboot the phone to run MIUI ROM for the first time.

9- Reboot to recovery again and flash the Gapps you downloaded following the instruction in the STEP 7 above. Just select the Gapps .zip file and flash it.

10- Finally, you can reboot your phone and enjoy MIUI!

How to Change your PC IP Address: Free Hacks

For every country across the globe there are IP addresses and each state under each country also has specific IP addresses. This IP addresses are being used by many gadgets and devices that have internet facilities to providing information about your location to some servers, web applications, websites and to whoever needs the info for any reason.
Within this page, we reveal a simple hack and trick that will help you use a dynamic IP address of any country or state on your PC through your android device.

This info is useful for those who wish to browse the internet without revealing their true identities for one reason or another. Aryk Enterprise does not provide this info to support thieft of any kind or illegal use therefore, your use of the info is at your own discretion.

By using this trick, you will be able to hide or disguise your true identities on the internet. Especially useful to browse and download from some websites that restrict some countries of the world from accessing there services and servers.
For example;

You are a Nigerian who loves to buy goods and items online but have difficulties accessing some online stores or that you are restricted from certain services by these stores, you can just change your IP address using this trick.

How to Change your PC IP Address Using Android Device
For a long time now, TIME and DATE are being used to varifying the validity and security of a website just like the Longitude and Latitude are being used to calculating distances and time.

Some browsers or gadgets/devices would not even connect to the internet if your time and date, especially, DATE is not correct.

Android devices come with GPS, Location and Navigation services built-in and all the applications that connects and provide location services rely on the built-in GPS and Location programs of the android device.

Now, the good news is;

Your android device GPS and Location programs also rely on your TIME ZONE

So, to change the IP address of your PC using your android device, you can now apply these understandings.Simply change your android device TIME ZONE

For example;

You are a Nigerian and wish to change your IP Address to Canada, simply change your TIME ZONE to Athlantic (-3.00) and save the settings.

Once saved, everytime you connect to the internet, an IP would be chosen for you between all the regions that are within that time zone.

To change the Time Zone of your android device go to;
Menu <<>> Settings <<>> Time And Date <<>> Select Time Zone

If the Select Time Zone option does not appear clickable, simply unmark the Automatic Time Zone option, select your desired Time Zone then, remark Automatic Time Zone back.

You can then connect your PC to the internet using your android device hotspot or via USB Tether. Either ways, the same address of the android device is used for the PC.

How to Flash Custom Recovery On HTC S-On Devices -Linux PC Users

Since the Windows PC guides have been given on how to flash custom recovery on HTC S-On devices, I think it is a good idea to provide such guides for the Linux PC users as well.
Following the comments and mail messages we have received on the flashable zip files that updates your HTC android devices with custom recovery we have provided so far, most of which are from HTC S-On android devices users, I think it is better to publish an alternative guide for flashing the custom recovery on the HTC S-On android devices besides the flashable zip updates.

If your HTC device is S-On, you may not be able to flash any unsigned zip file on the phone either via the Terminal or the hboot.

This is for some security reasons. Learn more about the HTC S-On devices here.

Alternative Method for Flashing Custom Recovery On HTC S-On Devices

You have two (2) known alternative methods to flash custom recovery on HTC S-On devices and they are;

1- Via recovery.img Flasher Apps (requires root access)
2- Via Terminal (requires unlocked bootloader)

But ONLY the second alternative, the Terminal option is approved and recommended to you by Aryk Enterprise which is the only one we discuss here.

The number one (1) alternative may get your HTC android device bricked and thereby render the phone useless for you.

Flashing Recovery.img File On HTC Devices Via Terminal/Command Prompt

First, you need to setup ADB Tools on your Linux Computer by following the guides given here.

Step By Step Guides for Flashing recovery.img File Via Terminal

1- First, you need to download the recovery image file for your HTC device from here or here and then, rename the recovery image file to recovery.img on your PC. -This would simply make the work easier for you.

2- Open Terminal on your Linux PC

3- Put your HTC Android device into hboot (or bootloader in case hboot fails) screen. To boot to hboot screen, simply put off the phone or remove the battery and re-insert it in the phone, press and hold the power + the volume down buttons together until the hboot screen comes up. To boot the phone to bootloader, from the hboot screen, simply press the power button once.

4- Now, connect the phone to the PC and make sure USB appears next to the hboot or bootloader on the phone screen.

5- On the Terminal Window type sudo fastboot devices then, hit the enter key -to confirm that the PC has detected the phone in fastboot mode. The phone's mode and its serial number should be listed on the next line if the PC has detected the phone.
You would be asked to supply the admin password for your Linux PC. Simply enter the Password and hit the enter key.

6- Now, on Terminal, type fastboot flash recovery recovery.img and hit the enter key.
Or, alternatively, you may type fastboot flash recovery (drag the recovery image file here) and hit the enter key. Wait few seconds for the operation to complete then, reboot your phone.

Please note that Linux computer does not require you to copy the file into any folder. You can put the file anywhere or in any folder on the PC. Just make sure the file name is correctly spelt.

ENJOY!
Before you can be able to use this method successfully, you need to have your HTC Android device bootloader unlocked first. Visit this page for info on how to unlock your HTC Device bootloader.

If you are using Windows PC, follow the step by step guides on this page.

How to Flash Custom Recovery On HTC S-On Devices

From time to time, we provide flashable zip files that contains custom recovery for different HTC devices however, going by the comments and mail messages we receive daily on each of this HTC devices for which we have provided the custom recovery, it is clear that most HTC phone users want alternative means of flashing custom recovery on their various phones.
Here, within this page, we discuss alternative method to be used by users that have HTC S-On devices.

If your HTC device is S-On, you may not be able to flash any unsigned zip file on the phone either via the command prompt/terminal or the hboot.
This is for some security reasons. Learn more about the HTC S-On devices here.

Alternative Method for Flashing Custom Recovery On HTC S-On Devices

You have two (2) known alternative methods to flash custom recovery on HTC S-On devices and they are;

1- Via recovery.img Flasher Apps (requires root access)
2- Via Command Prompt (requires unlocked bootloader)

But ONLY the second alternative, the Command Prompt option is approved and recommended to you by Aryk Enterprise which is the only one we discuss here.

The number one (1) alternative may get your HTC androice device bricked and thereby render the phone useless for you.

Flashing Recovery.img File On HTC Devices Via Terminal/Command Prompt

First, you need to setup ADB Folder on your Windows Computer by following the guides given here.

Step By Step Guides for Flashing recovery.img File Via Command Prompt

1- First, you need to download the recovery image file for your HTC device from here or here and then, rename the recovery image file to recovery.img on your PC. You should copy the file to your ADB Tools folder. -This would simply make the work easier for you.

2- Open Command Prompt on your Windows PC

3- Put your HTC Android device into hboot (or bootloader in case hboot fails) screen. To boot to hboot screen, simply put off the phone or remove the battery and re-insert it in the phone, press and hold the power + the volume down buttons together until the hboot screen comes up. To boot the phone to bootloader, from the hboot screen, simply press the power button once.

4- Now, connect the phone to the PC and make sure USB appears next to the hboot or bootloader on the phone screen.

5- On the Command Prompt Window type fastboot devices then, hit the enter key -this is to confirm that the PC has detected the phone in fastboot mode. The phone's mode and its serial number should be listed on the next line if the PC has detected the phone.

6- Now, on Command Prompt, type fastboot flash recovery recovery.img and hit the enter key.
Or, alternatively, you may type fastboot flash recovery (drag the recovery image file here) and hit the enter key. Wait few seconds for the operation to complete then, reboot your phone.

ENJOY!
Before you can be able to use this method successfully, you need to have your HTC Android device bootloader unlocked first. Visit this page for info on how to unlock your HTC Device bootloader.

If you are using Linux PC, follow the step by step guides on this page.

How Setup ADB And Fastboot Tools On Linux PC

Android Debug Bridge, ADB for short, is the tool responsible for bridging the gap between your android devices and your PC.
ADB let's you remotely communicate with your android device directly from your PC; even when the android device is off but remains connected to the PC.
Here, within this page, we discuss how to setup ADB Tools which include the fastboot and the adb (Android Mode) on your Linux PC.

Windows PC users should check this page for the guides on how to setup ADB Tools on the Windows PC.

Setting Up ADB Tools On your Linux PC
Except that you are a developer, you most likely need to have just the ADB and Fastboot tools ready on your PC for they are the commonly used android debug tools. Therefore, this guide is only meant for android phone users or mobile phone software engineers that only troubleshoot, transfer files to/fro android devices and their Linux PC, and or repair software related problems of android devices.
Also, if you root, flash ROMs, sideload apps on android devices amongst others, you also need these ADB packages.

Now, follow the step by step guides given below on how to setup basic ADB Tools on your Linux PC (Ubuntu, Fedorra) amongst others.

1- Conncet your Linux PC to the internet.
2- Lunch Terminal on your Linux PC.
3- First, you need to add the PPA from webupd8.org to your PC. Just type this sudo add-apt-repository ppa:nilarimogard/webupd8 on Terminal and hit the enter button. Enter your admin password once it prompts.
4- Now, you need to update your directories with all the necessary dependencies. To do so type sudo apt-get update on the Terminal and hit the enter button. Depending on the server, this may take few minutes. Simply wait until it completes.
5- And finally, to install ADB and FASTBOOT packages on the Linux PC, simply type sudo apt-get install android-tools-adb and hit the enter button. Once it completes type sudo apt-get install android-tools-fastboot and hit the enter button.
6- Supply the admin password for your Linux PC then hit the enter key.
7- Wait few seconds for the installations to complete and ENJOY!

To confirm the version of ADB and Fastboot packages installed on your Linux PC, simply type sudo adb version on the Terminal.
The next line of codes should display the ADB and version installed on your Linux PC.

Get 3GB of Data for Just N1,000 -Glo Users Only

How beautiful would it have been if the data bundles and subscriptions for the android devices in Nigeria were subsidized just like the Blackberry smart-phones!
When it comes to browsing the internet on android devices, it is as ugly as it is beautiful. Ugly in the aspect of its data consumption and beautiful when it comes to its browsing speed.

However, the previous Blackberry cheat that was working with all networks before it eventually seized is back and running fine with Glo, Airtel and MTN networks with the exception of the Etisalat network.

How to Setup Your Android Device to Using the Blackberry BIS Subscription
First, before you are able to use any of the Glo BIS subscriptions on your android devices, you need to modify your android device IMEI. For detailed info and step by step guides on how to modify or change your android device IMEI to a Blackberry device IMEI, click here.

Preparing your Android Device for the Cheat
Once your android device IMEI has been successfully changed to a Blackberry device IMEI, all that you have left to do is to change your APN (Access Point Name) to the Blackberry APN which is blackberry.net

To change the APN:

1- Go to Menu <<>> Settings <<>> Mobile Data <<>> Access Point Name
2- Click on the APN to be modified and change the APN to blackberry.net

Please note that the settings configuration pattern given above is for the HTC Android devices and may vary to the configuration pattern for your phone. The bottom line is; simply change your APN to the Blackberry APN which: blackberry.net

Once you have done that, you can begin surfing the internet using any BIS subscription from Glo, MTN and Airtel.

What is Android Device CID And How to Get it?

At some points in time, you may have stumbled upon a CID/MID or, you may have being requested to provide your HTC phone's CID/MID, this is mostly required whenever you need to make some modifications to your android phone's recovery, bootloader or firmware.
We shall discuss what the CID is and its relations to the android phone's recovery, bootloader and firmware here.

What is an Android Device CID?
The CID also known as the Carrier ID is the line of code that is already embedded in android devices. The CID is being used to lock the phone to a particular carrier and helps prevent the phone from accepting any other carrier SIM card other than the carrier it is locked to.
E.g

An android device whose CID is for the AT&T cannot be used with the TMobile SIM Card until it is unlocked.

Three (3) Ways to Know your Android Device CID
Before you can be able to manipulate the firmware or bootloader of your android device, you most likely need to know the CID of the device.

1- ADB Method: this is a generally accepted method that can be used to reveal most android devices CID.
To use this method, you need to have installed ADB/Set up ADB Tools on your PC and also; the android drivers for the particular android device must have being installed and ready for use on the PC.

Once done, simply connect your android device to the PC using compatible USB Cable, wait few seconds for the PC to install the necessary drivers, then lunch the Command Prompt.

1- On command prompt type; cd c:/your-adb-folder-name then, hit enter button.
2- On the next line type; adb devices and hit enter button.
3- On the next line type; adb reboot bootloader then, hit enter button. Wait few seconds for the phone to reboot to bootloader/hboot screen.
4- Now, make sure that the PC sees the phone in fastboot mode by typing fastboot devices on command prompt.
5- Lastly, type fastboot getvar CID on command prompt and hit enter button.

Note that you must have enabled "USB Debugging" on your android device before using this method. Also, learn more about setting up ADB on your Windows PC here.

2- Below Battery Seat: on most android devices especially; HTC the CID, MID amongst other details are written on the phone's battery seat. Simply remove the battery to reveal your phone's CID.

3- SIM Slot Cover: also, on HTC android devices like the HTC One V, the CID can be found around the SIM slot area. Look for the phone's CID around there.

Use Glo And Other Networks BIS On Any Android Device: New Working Cheats

Since browsing with the android device is not so affordable because of the rate at which it consumes data and worst still, the available data plans for the android device are not so price-friendly in Nigeria; android phone users readily look for alternatives for browsing the Internet on their android devices.

Here, we will reveal a permanent solution for all android devices to using Glo BIS and other networks BIS subscription for browsing the Internet.

About a year ago, we were able to use Blackberry APN which is blackberry.net to running Blackberry BIS subscriptions on any device that has Internet facility. This cheat worked on all networks for about a year before it was eventually blocked, but this time around, this cheat may work forever.

Since most network providers including Glo use mobile phone IMEI to determine the type of phone you use, we have found a way to change your android device IMEI to a Blackberry device IMEI.

By changing your android device IMEI to a Blackberry device IMEI, you will be able to use services designed for Blackberry including the BIS on your android devices. You just have to change your android device APN to blackberry.net (for all networks) and begin enjoying unlimited downloads on your android devices.

Changing Your Android Device IMEI to A Blackberry Device IMEI
This trick will disguise or clone your android device as Blackberry device, therefore, you might want to backup your android device before you proceed or save your original IMEI in case you wish to revert to your original IMEI in the future.

There are two methods for which you can use to change your android device IMEI to a Blackberry device IMEI and they are;

1- ADB/Fastboot Method. (Requires S-off or Unlocked Bootloader)
2- Terminal Method. (Requires Android Root)

1- ADB/Fastboot Method:
If your android device has S-off or Unlocked bootloader, this is the best method that works for all android devices. The guides to follow using this method are given below;

1- Install the android drivers for your particular android device on the PC and setup ADB Tools on the PC. Click here for info on setting up the ADB Tools.

2- Boot your android device to fastboot/bootloader mode by using the key conbinations or via Terminal/Command Prompt.

HTC Users can use this key combinations: Put off the phone then, Press the Power+Volume Down Buttons together until the phone boots to hboot.

To boot to bootloader via Terminal/Command Prompt; connect your android device to the PC, wait few seconds for the PC to install all the drivers then; open command prompt/Terminal and type these command lines;

cd c:/your-adb-folder-name
adb devices
adb reboot bootloader

***After each command line above, hit the enter button on the PC. To make this method work, you must enable USB Debugging on the phone.

3- Once the phone is on the bootloader screen, the PC should install another drivers. Make sure USB is seen on the phone bootloader screen. Confirm the bootloader mode by typing this line of code on the Command Prompt/terminal;

fastboot devices

Your android device Serial Number should be displayed on the Terminal/Command Prompt window.

4- Get any valid Blackberry Device IMEI number. You can use your friends Blackberry device IMEI number or generate another one using this tool.

5- Now, change your android device IMEI Number to the Blackberry device IMEI by typing the following code on Terminal/Command Prompt;

fastboot getvar imei
fastboot oem writeimei the-blackberry-imei
fastboot getvar imei

***The first IMEI displayed on the line above is your original IMEI. And the last IMEI displayed is the Blackberry IMEI you changed to.

The Terminal Method:
This method of changing android device IMEI to a Blackberry device IMEI can only be done on a rooted android device and Terminal Emmulator nust be installed on the phone. You can download Terminal Emulator from the Play Store.

To begin; Single SIM Device

1- Open Terminal Emulator on the phone.
2- Type SU and hit enter -this allows you to gain root access.
3- Type this command line in terminal: echo 'AT+EGMR=1,7,"IMEI_NUMBER" '>/dev/pttycmd1 or echo AT+EGMR=1*7*IMEI_1>/dev/pttycmd1

If your phone is a Dual SIM android device, use this command line;
echo 'AT+EGMR=1,10,"IMEI_NUMBER" '>/dev/pttycmd1 then; hit the enter button.

4- Wait for the exploit to complete then, reboot your phone.

NOTICE:
***This exploit works for all android devices including the MTK Androids and Nomandi (Nokia Androids).
***If at first your data service signal fluctuates, simply off and on the phone, run BBM at the first startup and then; the signal should become stable.

This Exploit Works for Which Networks?
This exploit has been tested and verified on the following networks;
1- Glo (Perfectly)
2- MTN (must first subscribe using a Blackberry device before you transfer the SIM to your android device)
3- Airtel (Perfectly)
4- Etisalat (Not yet confirmed)

Use PIG to Generate Blackberry Device IMEI And PINs

For one reason or another, you might be in need of Blackberry device IMEI and or PINs, this tool "PIG" can generate valid Blackberry device IMEI for you in just few seconds.
This is one of the best yet simple Blackberry Device IMEI generator I have used and below are the guides on how to use it.

How to Generate Blackberry Device IMEI Using PIG
1- Download the PIG Utility from here: this is a very light Blackberry Device IMEI generator that does wonders.

2- Extract And Lunch the Program: the program is compressed in a .rar file, simply extract it on your PC using WinRAR, WinZIP or any other extractor then; lunch it.

3- Fill in the Space as in the image below: this program requires you to have an IMEI. Fill the first field below with a valid IMEI of any device.

4- Select Your Desired Model line: select your desired Blackberry model from the second field.

5- Click the generate IMEI Button: once you click the generate IMEI button, the program scans and displays four (4) generated Blackberry Device IMEI for you.

To confirm if they are valid Blackberry device IMEI or not, visit imei.info.

Linux, Recommended Computer for Servicing Android Devices

Because the android is built based on the Linux form and kernel, Linux PC is arguably the best PC to be used for servicing android devices.
Although, you rarely find an operation that can be carried out on any android device using Linux PC and of which such cannot be done using Windows PC yet, Linux PC has a better chance servicing androids.

Why Linux PC is Preferred to Windows PC for Android Servicing

As a savvy that knows how android devices work, you should know the importance of android drivers and the relationship between the android drivers, Command Prompt/Terminal, Command lines and the ADB.

Of all the reasons why the Linux PC maybe preferred to the Windows PC when it comes to servicing the android device, there is only one reason most important of all and that's what we discuss here.

Android Servicing Tools

Command Prompt is an important tool for servicing and correcting software related problems of the android devices on Windows PC and Terminal is it counterpart on Linux PC, also for similar purposes thus; servicing and correcting software related problems of the android devices.

ADB, Android Debug Bridge, is the support tool needed to be installed on both Linux and Windows PCs before either the Terminal (On Linux PC) or Command Prompt (On Windows PC) could be useful for servicing and correcting any software related problems of an android device.

However, there is one more thing much more important and needed on either of the PCs, the Android Drivers.

Even with the ADB installed on the PC, the PC won't be able to communicate with the android device without the Android Drivers ready on the PC -this however implies only to the Windows PC.

As for the Linux PC, you only need to install the ADB (Android Debug Bridge) which are the support tools for the Android devices.

In plain words, Linux PC does not require android drivers to communicate with any Android Devices. You can correct and repair any software related problems of any android devices using your Linux PC without android drivers.

Get 1MB of Data for Just N1: Aryk DataShare Service Re-introduced

If you have once enjoyed the Aryk DataShare service and long to have it back, yes. The Aryk DataShare Service has just been re-introduced and this time, it is open to all MTN lines including MTN prepaid and postpaid lines.
Recently, the Aryk DataShare Service was basically for Glo subscribers before it was retired. You can check the detailed info about the Aryk DataShare Service that was for the Glo Subscribers here.

Get 1mb for N1, 500mb for N500 And So On

You can now get data (mb) for browsing the internet on any device that has internet facility at a price equal to N1 per 1mb and with a validity of 30 days i.e 400mb for N400, 500mb for N500, 1GB for N1,000 etc.

How it Works

Supposing you are an MTN Subscriber and wish to purchase a data plan from Aryk, what you will do is; just buy an MTN recharge card amount equal to the Data (mb) as in the table below:

Aryk MTN DataShare Cap. And Prices
S/N	Amount by Cash	Amount by R. Card	Data Cap.	Validity
1-	N300	N500	200mb	30 Days
2-	N450	N700	250mb	30 Days
3-	N600	N1,000	500mb	30 Days
4-	N1,100	N1,300	1GB	30 Days
5-	N2,200	N2,500	2GB	30 Days
6-	N3,200	N3,500	3GB	30 Days
7-	N4,200	N4,500	4GB	30 Days
8-	N5,200	N5,500	5GB	30 Days

***Your subscription will be activated within 3-5 minutes and you can check your data balance by dialing *461*7#

Send the recharge PIN by SMS to 08077888311, 08085997677 or by mail to aryk.info@gmail.com in the format given below:

Your Glo Phone Number «» Recharge PIN «» Recharge PIN Amount

If you prefer to send your payment using cash (money), you can send your payment via Quickteller, Paga, eTransact and direct ATM Transfer.

For details of the cash payment account, contact Aryk Enterprise on 0807 788 8311, 0808 599 7677 or via email: aryk.info@gmail.com.

Once the message/payment is recieved and validated, we would convert the recharge amount to MB (Data) for you. You shall recieve the validation notification by SMS within about 5 minutes. Then, the internet is at your fingertip!

Although, your data cap. expires in 30 days based on your subcription, the volume of data alloted to you expires once exhausted regardless of the day within the set period.

Settings for Each Device or OS

Though, you need the same configuration parameters for different devices and OS, below we give you a preview of where to locate configuration settings for each device.

For Blackberry Users go to:

Press Menu Button «» Options «» Advance Options «» TCP/IP
Mark/Tick enable APN box and fill in the text fields.

For Nokia S60V3 Users go to:

Press the Menu Button «» Settings «» Connections «» Access Points «» Add Access Points
And fill in the text fields as appropriate

For Nokia S40 Users go to:

Press the Menu Button «» Settings «» Configuration Settings «» Personal Configuration Settings
Press option to add new access point then, set it as your default.

For Android Users go to:

Press the Menu Button «» Settings «» Wireless Networks «» Mobile Networks «» Access Point Names
Then, press menu or option to add new APN and fill in the text field as appropriate.

NOTE:
The usual MTN configuration settings work for this data as well.

4all roms